Hawke cable glands flameproof eexe and eexd

Hawke ICG 653/UNIV Individual Core Compound Cable Gland, Dual Certified Flameproof EExd and Increased Safety EExe

cable glands The purpose of this type of cable gland is to form a barrier between the individual insulated conductors within
the cable, and prevent entry into the cable of the products of an explosion within the enclosure.
This cable gland provides an effective inner seal on cables having tape bedding or "soft" sheaths as in some
types of fire-retardant cables. The cable inner sheath seal of a conventional cable gland is replaced with a simple compound filled chamber which permits packing around individual insulated conductors. Assembly of the cable
gland compresses the packing material and distributes the compound evenly to effect a barrier at point of entry
into enclosure. As the compound chamber is transparent, it is possible to check that the chamber has been
effectively filled. Sealing on outer sheath of cable and armour clamping are provided in the conventional manner.

ICG 653/UNIV

Reduces stocking requirements, one armour clamp ring suits W, X and Z armour types. Eleven sizes suit cable outer diameters up to 104.5mm.
Dual certification EExd Flameproof and EExe increased safety helps reduce specification errors.
Fully inspectable armour clamping and transparent compound pot.
Wide cable acceptance range eases selection.
Same hexagon size enables faster installation.

Application Outdoor or indoor. For use with single wire armoured "W", wire braided "X" steel tape armoured "Z" elastomer and plastic cables with extruded or taped bedding e.g. soft sheathed fire retardant cable. In particular :- a)Cables which are not effectively filled. e.g. cables not complying with BS 5308, BS 5467, BS 6116, BS 6346, BS 6883 or equivalent. b) Enclosures containing an ignition source in gas group IIC areas. c) Enclosures exceeding 2 litres in volume, containing an ignition source and installed in a Zone 1 area. Function Provides armour clamping using the Hawke patented RAC armour clamping arrangement for all armour/braid types 'W' (single wire armour), 'X' (braid) and 'Z' (tape). Provides a compound seal around individual cable cores. Provides a seal on outer sheath of cable. Provides a deluge seal to prevent moisture ingress through to the armour/braid. Facilitates inspection of compound through the transparent plastic pot. Operating Temperature -20°C to +80°C as standard. -60°C + 100°C option available		Certification and Approval BASEEFA Certificate No. Ex 94C1337U. Flameproof EExd and increased safety EExe. EN 50014, EN 50018 and EN50019. Suitable for use in Zone 1 and Zone 2. Suitable for use in Group IIA, IIB and IIC. IP 66, IP 67 and Deluge Ingress Protection. IEC 60529, EN 60529 The ICG 653/UNIV cable gland is available certified by the Canadian Standards Association (CSA). CSA Certificate 178267-2500002782 (LR 787137) Ex d IIC & Ex e II Further details available on request. Materials and Finishes Hawke glands are manufactured as standard in brass. Alternative materials and plating are available upon request. Click here for more information on this cable gland Click Here for Information on Gland Accessories



about hawke cable glands \| intrinsically safe cable glands \| fieldbus foundation \| subsea connectors \| multi cable transits \| flameproof enclosures \| duct seals \| transformer breathers \| hawke cable gland products

Hawke Asia Pacific pte
15 Little Road
#04-02
Singapore 536988
Tel +65 (282) 2242
Fax +65 (284) 4244
E-mail information@hawkeasia.com.sg

Hawke Cable Glands Ltd
Atlantic Works, Oxford Street West
Ashton-under-Lyne, Lancashire
OL7 0NA, U.K
Sales 0870 6060105
General + 44 (0)161 308 3611
Fax +44 (0) 161 308 5848
E-mail marketing@hawke-cable-glands.com

Hawke Cable Glands America L.C.
600 Kenrick, Suite C-10, Houston, TX.
77060, U.S.A.
Tel: +1 (281) 445 7400
Wats: (800) 354 9189
Fax +1 (281) 445 7404.
E-mail hawke@hawkeusa.com

www.ehawke.com

Click here to view our legal information page