The purpose of the Hawke flameproof Connector is to enable electrical signals, instrumentation and power circuits to be transferred throughout a hazardous area with the minimum of installation and disconnection time.
Why
choose Hawke Flameproof connectors ? When specifying products used in hazardous
situations you need the utmost confidence. Hawke Connection Systems has many
years of experience in the design and manufacture of connectors using state
of the art technological advances.
All of our Ex connectors are manufactured to comply with the latest international quality standards with safety considerations being paramount. Extensive testing has been successfully completed by the relevant certification authorities.
Why choose a Hawke connector ? Our Ex connectors have
been designed specifically for use in Zone 1 and 2 potentially explosive atmospheres.
They are engineered to withstand rough handling and offer ingress protection
ratings of IP66, IP67 and a three hour deluge test. The design, testing and
certification of these connectors is primarily geared towards the oil, gas and
petrochemical industry although the connectors are also suitable for many industries
with hazardous and hostile applications.Acme Thread at Mating Interface
Running
Coupler Nut
Enables the cable gland to be fully assembled onto cable prior to fitting
to connector. Simplifies and speeds up connector assembly.
Threaded Bulkhead
Threaded bulkhead uses standard cable gland thread sizes, not expensive spigot
alternatives. Standard ‘O ’ring seal fitted to prevent ingress into
enclosure offering IP66, IP67 ingress protection.
Slotted Spacer Tube
Spacer tube can be fitted after cable cores are soldered /crimped to insert.
Increases working area for soldering /crimping.
Flanged In-line Shells
Loose flange with pre-drilled mounting holes. Can be retro-fitted to any in-line
connector half.
General
The Hawke Ex Connector range is easy to use and quick to terminate in hazardous
and hostile environments.
Applications
Our Ex connectors are designed for electrical power and control cable connections
in hazardous areas.They are used for various applications including major offshore
hook-up systems, offshore mooring linkage, fire alarm control, drilling drive
units, motor supplies and all portable equipment.
Certification
Flameproof EExd and increased safety EExe.
EN50014, EN50018 and EN50019.
Suitable for use in Zone 1 and Zone 2.
Suitable for use in gas group IIA, IIB and IIC.
Meets the requirements of IP66, IP67 ingress protection to IEC60529, EN 60529
and deluge protection.
Ambient temperature of -30 °C to + 40 °C as standard. Other Ambient
temperatures available on request.
Flameproof connectors
Hawke Sub sea connectors
about hawke cable glands | intrinsically
safe cable glands | fieldbus foundation | subsea
connectors | multi cable transits | flameproof
enclosures | duct seals | transformer
breathers | hawke cable gland products
|
|||||||||||||
